© 2009 Viking Preferred Service
17
Service Diagnostics and Procedures–Disassembly
All Induction Cooktop
1. Take off knobs.
2.
Remove washer and nut for switches (label wiring
and switch orientation before disassembly).
3.
Remove six screws (three on each side) that
secure ceramic top. Remove ceramic top.
4.
Carefully move first two inductors to side.
5.
Fold cloth insulation back and disconnect
inductor connections and pan sensor from
power board.
6. Remove first two inductors.
7. Repeat steps 5 and 6 for remaining inductors.
WARNING
To avoid risk of electrical shock, personal injury, or death, disconnect electrical power source to unit, unless
test procedures require power to be connected. Discharge capacitor through a resistor before attempting
to service. Ensure all ground wires are connected before certifying unit as repaired and/or operational.
Washer
Nut
Screws
Power Connections
Pan
Sensor
