© 2009 Viking Preferred Service
19
Service Diagnostics and Procedures–Disassembly
Induction/Radiant Cooktop
1. Take off knobs.
2.
Remove two screws from LF, LR, CF, CR.
Remove washer and nut from RF, RR
(label wiring and switch orientation before
disassembly).
3.
Remove six screws (three on each side) that
secure ceramic top and remove ceramic top.
4.
Disconnect indicator light power connectors.
5. Move inductor assemblies to side.
6. Disconnect front inductor ground screw.
WARNING
To avoid risk of electrical shock, personal injury, or death, disconnect electrical power source to unit, unless
test procedures require power to be connected. Discharge capacitor through a resistor before attempting
to service. Ensure all ground wires are connected before certifying unit as repaired and/or operational.
Screws
Ground Screw
Screws
Washer
Nut
Indicator Light
Power Connections
