9
BACK TRIM ACCESSORIES
Assembly and installation instructions are included with all back trim accessories.
ANTI-TIP STABILITY DEVICE INSTALLATION INSTRUCTIONS
1. The anti-tip bracket is to be attached to the rear wall as shown. The dimension for the bracket location from the
floor is to be determined after the range legs have been adjusted to the proper installation height shown in the
installation instructions and the range has been leveled.
2. Measure from the floor to the bottom of the anti-tip opening located on the back of the range.
3. Locate the anti-tip bracket on the wall at the measure dimension plus 1/16” (0.16 cm) clearance and attach securely
with provided toggle bolts.
4. Slide range into place. Be sure the bottom rear flange on the rear of the range slides under the bracket attached to
the rear wall.
Item “A”
Item
“A”
Figure 1
Figure 2
Item “B”
Bottom rear flange
To be determined after the range legs have been adjusted.
RANGES EQUIPPED WITH CASTERS
1. Adequate means must be provided to limit the movement of
castered ranges without depending on the connector and/or
quick disconnect device. This “restraint” should be inspected
as part of the maintenance and safety procedure. Restraint
cable must be connected at all times when range is in use.
2. When using the quick disconnect device and/or casters, the
“restrainer” must be attached to the wall and to the rear of
the range.
3. If disconnection of the restraint is necessary, ensure the
restraint is reconnected after the range has been returned to
its original position.
8
BASIC SPECIFICATIONS
Description
48” W. Models
60” W. Models
Overall width
47-7/8” (121.6 cm)
59-1/2” (151.1 cm)
Overall height
24” Deep Models Base Height
27” Deep Models Base Height
To top of grate support -
Min.
35-7/8 “ (91.1 cm) to
Min. 36-1/8” (91.8 cm
Max.
37-5/8” (95.6 cm)
Max 39-1/8” (99.4 cm)
Legs adjust 1-3/4” (4.5 cm)
Legs adjust 3” (7.6 cm)
Additions to Base Height
To top of spider grate -
add 1-1/8” (2.9 cm)
To top of island trim -
add 1-1/4” (3.2 cm)
To top of 6” backguard -
add 6” (15.2 cm)
To top of 10” backguard -
add 10” (25.4 cm)
To top of high shelf -
add 23-1/2” (59.7 cm)
Overall depth from rear
24” Deep Models
27” Deep Models
To end of side panel -
24-15/16” (63.3 cm)
27” (68.6 cm)
To end of control panel -
27-7/8” (70.8 cm)
28-3/4” (73.0 cm)
To end of knobs -
28-3/8” (72.0 cm)
30-3/8” (77.2 cm)
Electrical requirements
120 VAC/60 Hz; 4 ft. (121.9 cm), 3-prong plug attached to unit
Gas requirements
Shipped natural or LP/Propane gas; convert with conversion kit (purchased separately)
Maximum amp usage/
6G - 16.0 amps
4Q - 12.4 amps
6G -
23.6 amps
6Q - 12.4 amps
4G - 19.6 amps
6GQ - 20.0 amps
4GQ - 16.0 amps
Surface burner rating
15,000 BTU Nat./13,500 BTU LP
(4.4 kW/4.0 kW)
Griddle burner rating
12” / 18” Wide
24” Wide
15,000 BTU Nat./12,500 BTU LP
Two 15,000 BTU ea. Nat./12,500 BTU ea. LP
(4.4 kW/3.7 kW)
(Two 4.4 kW ea./3.7 kW ea.)
Grill burner rating
12” - 1@ 18,000 BTU Nat. (5.3 kW)/16,000 BTU LP (4.7 kW)
24” - 2@ 13,000 BTU Nat./LP (4.4 kW)
Broil rating
18,000 BTU Nat./16,000 BTU LP
(5.3 kW/4.7 kW)
Bake rating
Right - Two 15,000 BTU ea. Nat./LP
Two 15,000 BTU ea. Nat./LP
(Two 4.4 kW ea.)
(Two 4.4 kW ea.)
Left - One 15,000 BTU ea. Nat./LP
Two 15,000 BTU ea. Nat./LP
(One 4.4 kW ea.)
(Two 4.4 kW ea.)
Oven Interior width
Right - 24-1/8” (61.3 cm)
Both - 24-1/8” (61.3 cm)
Left -
13-3/8” (34.0 cm)
Oven Interior height
24” D. Models
Both - 16-1/8” (41.0 cm)
27” D. Models
27” D. Models
Both - 14-1/8” (35.9 cm)
Both-
14-1/8” (35.9 cm)
Oven Interior depth
24” D. Models
Right - 17-5/8” (44.8 cm)
Left -
18-3/4” (47.6 cm)
27” D. Models
27” D. Models
Right - 19-1/4” (48.9 cm)
Both -
19-1/4” (48.9 cm)
Left -
21-1/4” (54.0 cm)
Oven Interior overall size
24” D. Models
Right - 4.0 cu. ft.
Left - 2.3 cu. ft
27” D. Models
27” D. Models
Right - 3.8 cu. ft.
Both -
3.8 cu. ft.
Left - 2.3 cu. ft
Approximate Shipping wt.
6G - 591 lb. (266.0 kg) 4Q - 586 lb. (263.7 kg)
6G - 762 lb. (342.9 kg)
6Q - 586 lb. (263.7 kg) 4G - 596 lb. (268.5 kg)
6GQ - 757 lb. (340.7 kg)
4GQ - 596 lb. (268.5 kg)
(For Minimum Clearances from adjacent combustible construction refer to bottom of page 4.)
