APPLY POWER
a. Apply power by turning on the spa-dedicated circuit breaker.
b. Test the GFCI: push the TEST button and power is cut off. Push
RESET and power is restored. If these do not seem to work,
STOP! Do not use your spa.
There is no power, the
GFCI is defective or the equipment is malfunctioning. Only a
LICENSED ELECTRICIAN
should do further inspection.
ELECTRICAL SPECIFICATIONS
GENERAL
NOTICE: All spa electrical wiring must be in accordance
to meet NEC (National Electrical Code) state and local
codes.
Wire gauge must be in accordance with NEC
requirements
for the distance from current source to spa and
the current rating as stated on the ID label that is attached to
the equipment control enclosure.
GFCI CIRCUIT BREAKER REQUIREMENTS
The existing electrical outlet must have correct currently rating per local
and state codes to accept GFCI from spa.
Breaker
CAPACITY 15 amps
POLES 2
# WIRES 3
7
Summary of Contents for Plug-n-Play Spas Series
Page 1: ...Owner s Manual V 1 0 0 V 3 0 0 V 5 0 0 2014...
Page 23: ...NOTES 22...