11
Programming Features Index
DESCRIPTION
Section
Page
Connect/Disconnect
A
9
Phone Number Database
1
12
Event Log
2
13
Entry Code Database
3
14
Phone Name
4
14
Mute Alarm Until Next Failure
5
14
Phone Firmware
6
14
IP Firmware
7
15
Import/Export
8
15
Default Phone Settings
9
15
Diagnostics (used to check mic, speaker, relays and proximity card reader operation)
10
15
Security code (factory set to 845464)
11
15
Access Code (1-6 digits, blank = disabled, factory set to 123456)
12
15
Inbound Call Mode (Disabled, Auto Answer, Auto Answer Secure, Silent Monitor, Silent Monitor-Secure)
13
15
Select Time Zone
14
16
Daylight Savings
15
16
Keyless/Card Logging
16
16
Relay 1 or 2 Mode (Door Strike, Outbound Call, In/Outbound Call, Doorbell, Alarm Mode, factory set to Door Strike)
17
16
Relay 1 or 2 Command (1 or 2 digits, factory set to
and
Q
2) (Relay Mode must be set to Door Strike)
18
16
Relay 1 or 2 Time (0.5 - 99 sec, factory set to 5 sec)
19
16
Relay 1 or 2 Int/Ext (factory set to Internal)
20
16
Relay Activation Delay (Disabled or 0.5 - 99 sec, factory set to Disabled)
21
17
Relay Buzz (Activation Tone) Volume (1 digit 0-3, 0 = off, factory set to 3)
22
17
Relay Latch Commands (Enabled or Disabled, factory set to Enabled)
23
17
Speaker Volume (0-9, factory set to 2)
24
17
Microphone Volume (0-9, 0 = Auto, factory set to 5)
25
17
Talk/Listen Delay (VOX) (.1 to .9 sec, factory set to .5 sec)
26
17
Audio Call Progress (OFF, ON, factory set to ON)
27
17
Audio Detect Level (1-9, 1 = min, 9 = max, factory set to 5, power cycle unit after setting)
28
17
Call Length Time Out (disabled or 1 to 9 min, factory set to 3 min)
29
18
Dial Next Number on RNA (Ring No Answer) (disabled, 1 - 9 = number of rings, factory set to 7)
30
18
Dial Next Number on Busy (disabled or enabled, factory set to enabled)
31
18
REX Input
32
18
