background image

16

NEEDLES

The sewing machine needle plays an important role in successful sewing. To ensure you will 
get a quality needle, we recommend needle system 130/705H. The needle package included 
with your machine contains needles of  the most popular sizes for sewing on woven and 
stretch fabrics.

1

2

A

B

C

Universal Needles (A)

Universal needles have a slightly rounded 
point and come in a variety of  sizes. For 
general sewing in a variety of  fabric types and 
weights. 

Stretch Needles (B)

Stretch needles have a special scarf  to 
eliminate skipped stitches when there is a 
fl ex in the fabric. For knits, swimwear, fl eece, 
synthetic suedes and leathers. Marked with a 
yellow band. 

Denim Needles Sizes 90 (C)

Denim needles have a sharp point to 
penetrate tightly woven fabrics without 
defl ecting the needle. For canvas, denim, 
microfi bers. Marked with a blue band. 

Note: Change the needle often. Always use a straight 
needle with a sharp point (1). A damaged needle 
(2) can cause skipped stitches, breakage of  needles 
or snapping of  thread. A damaged needle can also 
damage the stitch plate.

Summary of Contents for Emerald 183

















































Reviews: