© 20
10
Viking Preferred Service
31
Diagnostics
Mode B Functions (continued)
Temperature Offset Calibration
The default setting for the Fresh Food Thermistor on a new unit depends on the type of Side-by-Side. A 48”
dispenser model is indicator 4, a 42” dispenser model and a 48” non-dispenser model is indicator 6, and a
42” non-dispenser model is indicator 7. A replacement Low Voltage Board comes set with a default of 8.
The offset must be changed to factory default for proper operation. The chart below shows the proper offset
settings for the various Side-by-Side models for the Fresh Food Thermistor.
Indicator
1
2
3
4
5
6
7
8
Coldest
Offset
+8
+6
+4
+2
0
-2
-4
-6
-8
48”D
42”D
48”
42”
Refrigerator Temperature Offset Calibration
Press “Ref Temp” pad to enter temperature offset. Ref Temp indicator will illuminate and one indicator bar
will illuminate. The factory default setting is 4, 6, or 7 depending on the type of Side-by-Side model.
If the proper Offset is not programmed, press the Higher or Lower pad to the proper Offset setting. The chart
above shows the correct indicator depending on the type of Side-by-Side model.
4 6 7