© 20
10
Viking Preferred Service
17
Operation
Settings and Functions (continued)
Max Refrigerator Mode
Max refrigerator mode adjusts
the refrigerator temperature to
the coldest setting for four
hours, at the end of which the
refrigerator’s temperature automatically returns to
its previous setting.
To activate the max refrigerator
mode, simply press the
”ACTIVATE CONTROLS” pad,
followed by the “MAX REF” pad.
The indicator light will glow to let you know you’ve
turned on the max refrigerator mode.
To deactivate the max refrigerator mode before
the end of the four hour cycle, press the
”ACTIVATE CONTROLS” pad, followed by the
“MAX REF” pad.
Max Freezer Mode
Max freezer mode adjusts the
freezer temperature to the
coldest setting for 4 hours, at the
end of which, the freezer temperature automatically
returns to its previous setting.
To activate the max freezer mode, press the
”ACTIVATE CONTROLS” pad, followed by the
“MAX FRZ” pad. The indicator light will glow to
let you know you have turned on the max freezer
mode.
To deactivate the max freezer mode before
the end of the 4 hour cycle, simply press the
”ACTIVATE CONTROLS” pad, followed by the
“MAX FRZ” pad.
Door Open Alarm
The door open alarm sounds and an indicator light
blinks if either door is left open for more than three
minutes.
To deactivate the door open alarm, press
the “ALARM OFF” pad or close the door
that is open.
High Temperature Alarm
The high temperature alarm sounds and an
indicator light glows if the refrigerator or the freezer
temperature is too high for two hours. A blinking
light signals which part of the appliance is affected.
The alarm will end when the temperature is brought
back to a proper setting.
To deactivate the high temperature
alarm, press the “ALARM OFF” pad.
Thermistor Alarm
The thermistor alarm is a special feature that
electronically senses temperature problems. The
thermistor alarm will sound and indicator lights 4-7 will
scroll if the thermistor is not operating properly. The
alarm can be deactivated by pressing the “ALARM
OFF” pad on your refrigerator’s control panel.
If the
alarm continues to sound, contact an authorized
Viking Range Corporation technician immediately.
Display Panel
To activate Control panel and display,
press the ”ACTIVATE CONTROLS” pad.
To deactivate Control panel and display,
press the ”ACTIVATE CONTROLS” or
“DISPLAY OFF pad.
Sabbath Mode
Sabbath mode is used to disable interior lights and
alarms for observance of the Sabbath.
Before the Sabbath mode is engaged, the bale arm
of the ice maker needs to be raised until it clicks into
the detent. This turns off the power to the ice maker.
To enter Sabbath mode, press the
”ACTIVATE CONTROLS” pad to activate
the control panel. Then, press and hold
“ACTIVATE CONTROLS” and “DISPLAY
OFF” pads simultaneously for three
seconds. It will beep three times and
light the three right blue squares so
you will know that you have activated
Sabbath mode.
When your refrigerator is in Sabbath mode, interior
lights, display (excluding
the three right hand side
lit blue squares), and
alarms are disabled.