INSTALLATION OF HOLD DOWN BRACKET - VECU MODELS
Front Brackets
After installating cooktop with two of the sheet metal
screws (Item 1), locate the sheet metal screw hole in the
rear of the burner box. Screw hold down brackets (Item
2) using the third sheet metal screw (Item 3) to the
burner box.
8
9
36” W. VECU TOP
36” W. VECU
BURNER BOX
21”
(53.3 cm)
36 3/4” (93.3 cm)
19”
(48.3 cm)
34 5/8” (87.9 cm)
6”
(15.2 cm)
15/16”
(2.4 cm)
36” W. VECU
CUTOUT w/VIPR161
DOWNDRAFT
34 3/4” (88.3 cm)
20 1/4”
(51.4 cm)
2 1/4”
(5.7 cm)
7/8”
(2.2 cm)
7/8”
(2.2 cm)
33” (83.8 cm)
Indentification Label Location
Rear and Side Brackets
1. After installation of cooktop, locate the two
sheet metal screw holes on each end of the
bottom of the burner box. Screw hold down
bracket (Item 1) with sheet metal screw (Item 2)
to the burner box.
2. Screw the eye bolt (Item 3) into the self-retain-
ing nut (Item 3) and tighten firmly against bot-
tom of countertop.
Cooktop
Countertop
Item 4
Item 3
Item 2
Item 1
Cooktop
Countertop
Item 1
Item 2
Item 3
