Disassembly Procedure
WARNING
To avoid risk of electrical shock, personal injury, or death, disconnect power to unit before servicing,
unless testing requires power.
42
©2007 Viking Preferred Service
Refrigerator Thermistor Removal
Condition Requirements:
Electronic Control Removed
1. Unclip thermistor from control panel housing.
2. Cut wires at thermistor to remove.
3. Reverse procedure for installation.
Electronically Controlled Damper Removal
Condition Requirements:
Door Opened
1. Remove louvered cover from damper control
housing.
2. Remove two screws and damper cover from
damper.
3. Remove foam insert by pulling it off of damper
control.
4. Unclip damper from unit.
5. Disconnect connectors from damper and remove
damper.
6. Reverse procedure for installation.
Water Filter Removal
CAUTION
To avoid risk of personal injury or property damage;
Use caution when removing, air trapped in system
may cause water and cartridge to eject.
Condition Requirements:
Door Opened
Initial Installation
1. Remove blue bypass cap and retain for later use.
2. Remove sealing label from end of filter and insert
into filter head.
3. Rotate gently clockwise until filter stops. Snap filter
cover closed.
4. Flush air from system by running water continuously
for two minutes through dispenser until water runs
steady.
Replacing Water Filter
1. Turn filter counterclockwise until it releases from
filter head.
2. Drain water from filter into sink, and dispose in
normal household trash.
3. Remove sealing label from end of filter and insert
into filter head.
4. Rotate gently clockwise until filter stops. Snap filter
cover closed.
5. Flush air from system by running water continuously
for two minutes through dispenser until water runs
steady.
Summary of Contents for DDBF036LSS
Page 18: ......
Page 50: ...Appendix A 50 2007 Viking Preferred Service NOTES ...
