The
K-1900-3
converts any Touch Tone phone into a multi-number auto dialer that will store up to 150 telephone numbers in non-
volatile memory. Use with Viking’s
K-1705-3
or
K-1900-8
phones to provide vandal resistant handsfree or handset communication.
When a call initiated by the
K-1900-3
is answered by an apartment or business tenant, a built-in contact closure may be activated
to control an electric gate or door strike. Up to 150 keyless entry codes may also be programmed, providing tenants with keyless
entry. The
K-1900-3
can be programmed locally or remotely using a standard Touch Tone phone. The
K-1900-3
has built-in user
dialing restriction to help prevent unauthorized calls and toll fraud.
A. K-1900-3 Apartment/Office Entry Dialer
A
A
p
p
p
p
l
l
i
i
c
c
a
a
t
t
i
i
o
o
n
n
s
s
The
C-2000A
allows up to 4 entry phones to call into your existing residential or business phones or phone system. Tenants may
answer the call, converse with the visitor and activate a contact closure to control electronic gates or door strikes. The
C-2000A
provides “Caller ID,” “Call Waiting ID” and “Call Waiting” tone when the phone line is in use. Tenants may gain entry at each gate
by entering a Touch Tone keyless entry code. Tenants may call out to each entry phone for monitoring purposes. An auxiliary input
is also available for connecting a common garage door opener/receiver and auxiliary keyless entry keypads.
B. C-2000A Advanced Door/Gate and Entry Phone Controller
18VDC/200mA (maximum) Power Output:
for powering door strikes, magnetic locks, etc.
1 2 3 4 5 6 7 8 9 10
APARTMENT ENTRY
SYSTEM
VIKING
ELECTRONICS
HUDSON, WI 54016
VIKING
©
MODEL K-1900-3
1
2
3
4
5
6
7
8
9 10
LINE IN
PHONE
RELAY CONTACTS
1A 1B
AUX.
TRIG.
INPUT
18 VDC
200mA
- +
POWER 13.8 VAC
PROGRAMMING
OFF ON
* C.O. Line
or Analog
PABX/KSU
Station
13.8V AC
Adapter
Provided
120V AC
K-1705-3
+
-
Doorstrike/Magnetic Lock
Relay Contact Specifications:
5A@30VDC/250VAC maximum
or
Normally Closed Relay Contact
Normally Open Relay Contact
Auxiliary Relay Trigger Input:
momentary contact closure from postal lock, etc.
Local Programming/
Security Code
Bypass Switch
Note:
Power typically not
required for gate controllers.
COM
N.C
N.O.
Secondary Relay Contacts:
to trigger
timed lights, camera control, etc.
Entry Phone 1
E-50-SS shown,
not included
(Example: Front Door)
VIKING
©
MODEL C-2000A
VIKING
ELECTRONICS
HUDSON, WI 54016
ADVANCED DOOR/GATE AND
ENTRY PHONE CONTROLLER
1 2 3 4 5
6 7 8 9 10
11 12 13 14 15
16 17 18 19 20
21 22 23 24 25
26 27 28 29 30
PWR 13.8 V
A
C
EARTH GND
ENTR
Y
PHONE 1
DOOR STRIKE 1
ENTR
Y
PHONE 2
DOOR STRIKE 2
ENTR
Y
PHONE 3
DOOR STRIKE 3
ENTR
Y
PHONE 4
DOOR STRIKE 4
DOORBELL
SWITCH /
AUX. INPUT
AUX. CONT
ACT
OUTPUT
PHONE LINE
INPUT
LINE OUT
T
O
PHONES
C.O. / Phone
Line Input
To Standard
Analog Touch
Tone House
Phone(s)
or
Entry Phone 4, K-1705-3 in VE-6x7 shown,
not included (Example: Gate)
Entry Phone 2, E-50-SS
shown, not included
(Example: Back Door)
To Entry Phone 4
(Power typically not
required for gate controllers)
Doorstrike/
Magnetic Lock
5A@30VDC/
250VAC
maximum
A contact closure output is available for each
entry phone. An auxiliary output is also available.
* Earth
Ground
(optional)
Optional Doorbell Switch
(not included, see Programming
section L on page 5)
Optional Postal Lock
(not included)
See DIP Switch Programming
Programming section C (page 4)
13.8V AC
Adapter
(included)
120V AC
Entry Phone 3, E-30 in VE-5x5 shown, not included
(Example: Garage)
To Gate
Controller
Tip (Audio)
Ring
Tip (Audio)
Ring
Video Out
Example:
2-4 Channel Video
RF Modulator
Example:
Amplified
RF Splitter
Video Out
Multi Room
Video Out
02
Antenna,
CATV, etc.
1 2 3 4
7
