7
A. Accessing Programming
Programming
1. Accessing the Programming Mode with a Security Code
2. Accessing the Programming Mode Locally (Security Code Bypass Mode)
Note:
This mode is useful for programming the
C-2000B
without a telephone line connected.
Step 1.
Come off-hook with any phone (device) connected to terminals
4 & 5
,
LINE OUT
TO PHONES
.
Step 2.
Enter
Q
#
followed by the 6-digit security code (factory set to
845464
, see
Programming
section
C
).
Step 3.
A double beep will indicate that you have accessed the programming mode.
Step 4.
You can now touch tone program the features listed in section
B
.
Step 5.
When finished programming, hang up.
Step 1.
Move DIP switch 2 from
OFF
to
ON
(Security Code Bypass Mode, see
DIP Switch
Programming
section
D
).
Step 2.
Come off-hook with any house phone connected to terminals
4 & 5
,
LINE OUT TO
PHONES
.
Step 3.
A double beep will indicate that you have accessed the programming mode.
Step 4.
You can now touch tone program the features listed in section
B
.
Step 5.
When finished programming, hang up and move DIP switch 2 to the
OFF
position.
3. Accessing the Programming Mode Remotely
Notes :
1.
Programing from a cell-phone may not be suitable in areas with weak coverage.
2.
A house phone has access to all features listed. A remote phone can use all features except
“Ignore touch tones to program an entry phone” (##1 to ##4 commands).
Step 1.
Call into the
C-2000B
from a touch tone phone.
Note:
Call in from another line to
avoid C.O. busy signals,etc.
.
Step 2.
Answer the call from any house phone (device) connected to terminals
4
&
5
,
LINE
OUT TO PHONES
.
Step 3.
From either phone enter
Q
#
followed by the six digit security code (factory set to
845464
, see
Programming
section
C
).
Step 4.
A double beep will indicate that you have accessed the programming mode.
Step 5.
You can now touch tone program the features listed in section
B
.
Step 6.
When finished programming, hang up.
