18
32. Unit Firmware
If new
300-IP
firmware is available, after opening the programming software a pop up window will ask if you would like
to update firmware. Another way to update is accomplished by clicking the speaker firmware “Update Unit” button. You
can then browse to the folder that contains the HEX file for updating the unit’s firmware. This method is typically only
used when Viking Technical Support has sent you updated firmware.
33. Import / Export
The Import / Export feature is useful for backing up all the
300-IP’s
programming or for importing programming when
installing multiple units with a majority of the same programming.
Clicking on the “Clear Speaker Settings” button in programming will reset all of the Programming Features back to
their factory default settings.
NOTE:
This command will not change or reset your IP settings.
34. Clear Speaker Settings
Clicking on the “Clear IP Settings” will reset all of the IP settings back to their factory default settings. This also clears
paging Group settings and Addresses.
NOTE:
This will not affect any speaker or paging settings.
35. Clear IP Settings
36. Diagnostics
The Diagnostics section in the Viking IP
Programming can be used to test the functionality of the optional
RC-4A
relays.
31. IP Firmware
Update IP is currently not available. The ability to update IP firmware will be made available in a later release of Viking
IP Programming software. If an IP firmware update is needed, Viking Technical Support will assist in updating the IP
firmware.
