manualshive.com logo in svg

Viken Detection Pb200i, User Manual

The Viken Detection Pb200i is a cutting-edge handheld explosive trace detection device. For a comprehensive understanding of its features and operation, refer to the User Manual. Download this essential manual for free from manualshive.com and uncover the true potential of your Pb200i device.

Share
Download
background image

Page 51  

 

 

Warranty

 

Seller warrants that the Products will operate or perform substantially in conformance with Seller's published 
specifications and be free from defects in material and workmanship, when subjected to normal, proper and 
intended usage by properly trained personnel, for the period of time set forth in the product documentation, 
published specifications or package inserts.  If a period of time is not specified in Seller’s product 
documentation, published specifications or package inserts, the warranty period shall be one (1) year from the 
date of shipment to Buyer in the country of purchase. Any part replaced on an instrument, covered by the 
original factory warranty, will be warranted for the remainder of the instrument’s factory warranty. Seller agrees 
during the Warranty Period,  to repair or replace, at Seller's option, defective Products so as to cause the same 
to operate in substantial conformance with said published specifications; provided that Buyer shall (a) promptly 
notify Seller in writing upon the discovery of any defect, which notice shall include the product model and serial 
number (if applicable) and details of the warranty claim; and (b) after Seller’s review, Seller will provide Buyer 
with service data and/or a Return Material Authorization (“RMA”), which may include biohazard or other 
Radiation safety decontamination procedures and other product-specific handling instructions, then, if 
applicable, Buyer may return the defective Products to Seller with all costs prepaid by Buyer. Replacement 
parts may be new or refurbished, at the election of Seller, the warranty of these parts expire with the instrument 
warranty.  All replaced parts shall become the property of Seller.  Shipment to Buyer of repaired or replacement 
Products shall be made in accordance with the Delivery provisions of the Seller’s Terms and Conditions of 
Sale.  Accessories and Consumables are expressly excluded from this warranty. 
Notwithstanding the foregoing, Products supplied by Seller that are obtained by Seller from an original 
manufacturer or third party supplier are not warranted by Seller, but Seller agrees to assign to Buyer any 
warranty rights in such Product that Seller may have from the original manufacturer or third party supplier, to 
the extent such assignment is allowed by such original manufacturer or third party supplier. 
In no event shall Seller have any obligation to make repairs, replacements or corrections required, in whole or 
in part, as the result of (i) normal wear and tear, (ii) accident, disaster or event of force majeure, (iii) misuse, 
fault or negligence of or by Buyer, (iv) use of the Products in a manner for which they were not designed, (v) 
causes external to the Products such as, but not limited to, power failure or electrical power surges, (vi) 
improper storage and handling of the Products, (vii) use of the Products in combination with equipment or 
software not supplied by Seller, (viii) Moderately heavy or excessive impact against any object, including but 
not limited to floors, walls, furniture, sample or other objects, (ix) Excessive water, moisture or condensing 
humidity that breaches the instrument seals, (x) Excessive or extreme ambient or direct temperature or (xi) 
Heavy vibrations directly to the instrument for extended periods of time. If Seller determines that Products for 
which Buyer has requested warranty services are not covered by the warranty hereunder, Buyer shall pay or 
reimburse Seller for all costs of investigating and responding to such request at Seller's then prevailing time 
and materials rates.  If Seller provides repair services or replacement parts that are not covered by this 
warranty, Buyer shall pay Seller therefore at Seller's then prevailing time and materials rates.   
ANY INSTALLATION, MAINTENANCE, REPAIR, SERVICE, RELOCATION OR ALTERATION TO OR OF, OR 
OTHER TAMPERING WITH, THE PRODUCTS PERFORMED BY ANY PERSON OR ENTITY OTHER THAN 
SELLER WITHOUT SELLER'S PRIOR WRITTEN APPROVAL, OR ANY USE OF REPLACEMENT PARTS 
NOT SUPPLIED BY SELLER, SHALL IMMEDIATELY VOID AND CANCEL ALL WARRANTIES WITH 
RESPECT TO THE AFFECTED PRODUCTS. 
THE OBLIGATIONS CREATED BY THIS WARRANTY STATEMENT TO REPAIR OR REPLACE A 
DEFECTIVE PRODUCT SHALL BE THE SOLE REMEDY OF BUYER IN THE EVENT OF A DEFECTIVE 
PRODUCT.  EXCEPT AS EXPRESSLY PROVIDED IN THIS WARRANTY STATEMENT, SELLER 
DISCLAIMS ALL OTHER WARRANTIES, WHETHER EXPRESS OR IMPLIED, ORAL OR WRITTEN, WITH 
RESPECT TO THE PRODUCTS AND INCLUDING WITHOUT LIMITATION ALL IMPLIED WARRANTIES OF 
MERCHANTABILITY OR FITNESS FOR ANY PARTICULAR PURPOSE.  SELLER DOES NOT WARRANT 
THAT THE PRODUCTS ARE ERROR-FREE OR WILL ACCOMPLISH ANY PARTICULAR RESULT. 
Specific warranties of common accessories: 

 

Battery charger and battery packs are warrantied for twelve (12) months 

 

Standard instrument accessories are warrantied for twelve (12) months 

 

Parts or spare parts sold, installed or supplied outside of the product warranty period are warrantied for 
twelve (6) months 

 
 

 

Summary of Contents for Pb200i





















































Reviews:

No comments

Related manuals for Pb200i

AccuEnergy Acuvim-L Series User Manual preview
Acuvim-L Series
Brand: AccuEnergy Pages: 83
Kane CO2 Instruction Manual preview
CO2
Brand: Kane Pages: 16
Bacharach Fyrite Tech 50 Instruction, Operation & Maintenance preview
Fyrite Tech 50
Brand: Bacharach Pages: 48
Bacharach HGM300 Installation & Operation Manual preview
HGM300
Brand: Bacharach Pages: 24
Macnaught 050 Manual preview
050
Brand: Macnaught Pages: 14
Calsense ET2000 Setup preview
ET2000
Brand: Calsense Pages: 4
jenway PFP7 Operating Manual preview
PFP7
Brand: jenway Pages: 50
jenway 7300 Operating Manual preview
7300
Brand: jenway Pages: 62
UEi C163 Quick Start Manual preview
C163
Brand: UEi Pages: 8
Nagano Keiki GC31 Instruction Manual preview
GC31
Brand: Nagano Keiki Pages: 25
THORLABS PM10-10 Operation Manual preview
PM10-10
Brand: THORLABS Pages: 21
Xtralis IntrusionTrace Quick Start Manual preview
IntrusionTrace
Brand: Xtralis Pages: 13
Tektronix RF Scout Quick Start User Manual preview
RF Scout
Brand: Tektronix Pages: 124
SAT-Kabel SPM 22 PF Operating Instructions Manual preview
SPM 22 PF
Brand: SAT-Kabel Pages: 12
SANKO SWT-7200 II Instruction Manual preview
SWT-7200 II
Brand: SANKO Pages: 97
Staco Energy EMD Quick Manual preview
EMD
Brand: Staco Energy Pages: 2
Rubicson 48829 Manual preview
48829
Brand: Rubicson Pages: 4
Mid-West Model 220 Installation And Maintenance Instruction preview
Model 220
Brand: Mid-West Pages: 14

Brands by name

Popular brands

Load more brands