17
3 Design and Function
AUDIBLE CONTINUITY TEST
1. Connect the red test lead to the „V.
Ω
.mA“ jack and the black test lead to the „COM“ jack.
2. Set the rotary switch to the „ “ position.
3. Connect test leads to two points of circuit to be
4. If continuity exists, built-in buzzer will sound.
d
1. Cleaning
• Always keep the VIGOR multimeter clean.
• Before opening the housing, always disconnect the test leads from all energised circuits.
• For continued protection against fire; replace the fuse only with the specified voltage and
current ratings F250mA/600V(quick acting); F10A/600V(quick acting)
• Do not use degreasing agents or water in order to avoid corrosion.
• For questions and spare parts orders, please indicate the article number of the device.
• Inspection and repair may only be carried out by qualified personnel.
2. Spare parts
Only use the manufacturer‘s original spare parts.
• Unsuitable or defective spare parts may cause damage or total failure of the device.
• The use of non-approved spare parts will void all warranty, service and liability claims as well
as all claims for compensation against the manufacturer or its agents, distributors and sales
representatives.
3. Storage
The device has to be stored according the following conditions:
• Do not store the device outdoors.
• Keep the device in a dry and dust-free place.
• Do not expose to liquids and aggressive substances.
• Do not expose to liquids and aggressive substances.
• Relative air humidity: max. 60%.
4. Disposal
• For disposal, clean the device and disassemble it according to the regulations for work
safety and environmental protection. Please recycle components.
Your contact for:
• Warranty
4 Maintenance and cleaning
Summary of Contents for V4324
Page 19: ...19 Notizen Notes...