ViGOR GmbH •
}
10 04 61 • D-42804 Remscheid • Germany
GB
USA
This ViGOR service Jack is long-lasting and can be used very versatile in:
Workshop, garage, motor vehicle and other areas.
For Your Information
1. General Information
• Please make sure that the user of this tool carefully reads these operating instructions and fully
understands all information given before it is used.
• These operating instructions contain important advice that is necessary for a safe and trouble-
free operation of your ViGOR tool.
• For effective use of the tool as intended, it is essential that all safety and other information
in these operating instructions is adhered to.
• For this reason, always keep these operating instructions together with your ViGOR tool.
• This tool has been designed exclusively for specific applications. ViGOR emphasizes that
any modification to the tool and/or use on an application not detailed to its intended
application are strictly forbidden.
• ViGOR will not be liable for any injuries to persons or damage to property originating
from improper application, misuse of the tool or a disregard of the safety instruc-
tions.
• Furthermore, the general safety regulations and regulations for the prevention
of accidents valid for the application area of this tool must be observed and
respected.
2. Liability and Warranty
• Any deviation from the intended use and/or any misapplication of the tool is
not allowed and will be considered as improper use.
• Any claims against the manufacturer and/or its authorized agents because
of damage caused by improper use of the tool are void.
• Any personal injury or material losses caused by improper use of the tool
are the sole responsibility of the operator and user.
3. Spare Parts
• Only use the manufacturer’s original spare parts.
• Unsuitable or defective spare parts may
cause damage, malfunction or total
failure of the tool.
• The use of non approved spare parts will
void all warranty, service and liability
claims as well as all claims for compen-
sation against the manufacturer or
its agents, distributors and sales
representatives.
4. Disposal
• For disposal, clean tool and
disassemble it according to the
regulations for work safety and
environmental protection. Components can
be recycled.
• Metal components can be scrapped.
Operating Instruction
Hydraulic Service Jack
V 1436
