13
MODEL VG06045
!
COMPLETED
4
2
8
1
1
SCREW COUNTER CLOCKWISE
TO LOOSEN FOR ACCESS TO
MOUNTING CLIP
MOUNTING CLIP
HOUSING
3. R
emove the structural rail. Install the
mounting clips by drilling holes at the center
point of your markings and inserting plastic
anchors (#16) inside them. Replace the
mounting clips and screw them into the
plastic anchors with the hex screws (#13).
Not necessary if installing into studs.
Studs are the preferred means of
installation, anchors can pull out of the wall
causing property damage and bodily harm.
Note: The housing to the top wall mount
bracket assembly (#1) will need to be
unthreaded in order to install the mounting
clips.
4. Replace the structural rail and slide
mounting brackets against the wall. Tighten
the hex screws.
NOTE: There is a 12mm
adjustment built into the mounting clips.
If an adjustment is needed, remove the
rail and adjust accordingly.
C3
MOUNTING
CLIP
13
16
12mm
2
1
8
1
4
C4
73 1/4"
73 1/4"