10
MODEL VG06045
B3
3. Use the level to position the front fixed
panel correctly. Make sure the seal strip
(#10) is against the wall. Mark holes on the
wall for the mounting screws. Make sure
the cut out for the fixed panel holder on the
fixed panel matches with the center point of
the fixed panel holder (#7) the fixed panel
(#4) and the bottom structural rail (#9)
should be parallel prior to attaching the fixed
panel to the wall.
4. Remove the front fixed panel. Drill holes
into the respective marks and insert plastic
anchors (#16) inside them. Not necessary
if installing into studs. Studs are the
preferred means of installation, anchors can
pull out of the wall causing property damage
and bodily harm.
4
7
12
9
10
B4
7
9
!
16