Viglen BX110 Chassis Quick Start Guide
10
Gaining access to the System Motherboard
Removing the Cover
This procedure describes how to remove the side cover from the system for the first
time. Before proceeding, be sure you are thoroughly familiar with the information in
“Before You Begin” at the front of this chapter.
1. Locate and remove the two screws from the edge of the side panel, which has the
handle.
2.
Grasping the handle on the side panel, gently slide the chassis cover away from the
front panel of the system.
Replacing the Cover
This procedure describes how to replace the side panel on the system. Before
proceeding, be sure you are thoroughly familiar with the information in “Before You
Begin” at the front of this chapter.
1. Position the side cover on the open end of the chassis with the edge closest to the
handle facing the back panel of the system.
2. Grasp the back edge of the cover and simultaneously push from the back edge until
the front edge of the cover meets the system front panel.
3. The side panel can be secured by one of two ways:
a. Screwing the side panel into the chassis with the two screws removed earlier
to gain entry to the motherboard
b.
Simply leaving the side panel on the system without screwing it in, as the side
panel locks in place. For added security this panel can be locked by using the
supplied key, to prevent unauthorized access.
