Page 1
www.safe-t-cover.com 1-800-245-6333
7/14/2020
ASSEMBLY INSTRUCTIONS PLEASE READ CAREFULLY
Model No.
Inside
Dimensions
Outside
Dimensions
Recommended Concrete
Pad Dimensions
800 Series
38"W x 120"L x 56"H
41 3/4"W x 123 1/8"L x 59 1/4"H
52"W x 134"L x 6" Thick
800T Series
38"W x 120"L x 80"H
41 3/4"W x 123 1/8"L x 83 1/4"H
52"W x 134"L x 6" Thick
1.
Do not remove the PVC masking film until the enclosure is fully assembled. The PVC masking film
will protect the finish of the metal panels during installation.
2.
The concrete pad should be 6” thick x 14” longer than enclosure ID x 14” wider than enclosure ID.
Please note - the concrete pad should be level, or the access panels may be difficult to install.
3.
Mark the concrete pad for the outside of the enclosure using the dimensions in the table above.
4.
Assemble the “BS-A-BL” (side-end-side) assemblies using hex head screws. (For best results, insert a
bead of silicone caulk into the inside bend of the “A” panel corners.) Position both sets of assembled
panels on the marked concrete base (Fig 1).
FIG. 1
