20
Parameter
Description
Clock Source
: To view the Vi3026’s clock source, select “Use local Settings” or “Use
NTP Server”.
Date and Time Format
: The drop bar is for choose appropriate time format. Three
selections are provided as below.
YYYY-MM-DD HH:MM:SS
MM-DD-YYYY HH:MM:SS
DD-MM-YYYY HH:MM:SS
24 hours: The time is always represented in the 24-hour system
12 hours: The time is always represented in the 12-hour system
Local Time:
Shows the current time of the system. The local time can only be set or
filled out in 24 hours format.
Time Zone Offset
: Provides the time zone offset relative to UTC/GMT. The
benchmark based on GMT. The valid range is from -720 to 720 minutes
Daylight Saving:
Daylight saving is adopted in some countries. If set, it will adjust the
time lag or in advance in unit of hours, according to the starting date and the ending
date. For example, if you set the day light saving to be 1 hour. When the time passes
over the starting time, the system time will be increased one hour after one minute
at the time since it passed over. And when the time passes over the ending time, the
system time will be decreased one hour after one minute at the time since it passed
over.
The switch supports valid configurable day light saving time is –5 ~ +5 step one hour.
The zero for this parameter means it need not have to adjust current time,
equivalent to in-act daylight saving. You don’t have to set the starting/ending date. If
you set daylight saving to be non-zero, you have to set the starting/ending date.
Otherwise, the daylight saving function will not be activated.
Time Set Offset:
Provides the daylight saving time set offset. The offset is given in
minutes east of GMT. The valid range is from 1 to 1440 minutes. The default setting
is 60 minutes. When using NTP, make sure the correct offset to GMT is used for your
time zone.
Daylight Savings Type
: Provides the Daylight savings type selection. You can select
“By Dates” or “Recurring”, two types for Daylight saving.
From
: To configure when Daylight saving start date and time, the format is “YYYY-
MM-DD HH:MM”. The column “HH: MM” can only be set up in 24 hour format.
To
: To configure when Daylight saving end date and time, the format is “YYYY-MM-
DD HH:MM”. The column “HH: MM” can only be set up in 24 hour format.
NOTE
:
The under “from” and “to” was
displayed what you set on the “From” and
“To” field information.
NOTE
:
The local time column and Day light
saving column will not actively change by the
date time format selection.
