background image

ii

Important Safety Instructions

1.  Read these instructions completely before using the equipment.

2.  Keep these instructions in a safe place.

3.  Heed all warnings.

4.  Follow all instructions.

5. 

Do not use this equipment near water. Warning: To reduce the risk of fire or 

electric shock, do not expose this apparatus to rain or moisture.

6. 

Clean with a soft, dry cloth.

7. 

 Do not block any ventilation openings. Install the unit in accordance with the 

manufacturer’s instructions.

8. 

 Do not install near any heat sources such as radiators, heat registers, stoves, or 

other devices (including amplifiers) that produce heat.

9.   Do not defeat the safety purpose of the polarized or grounding-type plug. A 

polarized plug has two blades with one wider than the other. A grounding type 

plug has two blades and a third grounding prong. The wide blade and the third 

prong are provided for your safety. If the provided plug does not fit into your 

outlet, consult an electrician for replacement of the obsolete outlet.

10. Protect the power cord from being walked on or pinched particularly at plugs. 

Convenience receptacles and the point where they exit from the unit. Be sure that 

the power outlet is located near the unit so that it is easily accessible.

11. 

Only use attachments/accessories specified by the manufacturer.

12. 

Use only with the cart, stand, tripod, bracket, or table specified by the 

manufacturer, or sold with the unit. When a cart is used, use caution when 

moving the cart/unit combination to avoid injury from tipping over.

13. Unplug this unit when unused for long periods of time.

14. 

Refer all servicing to qualified service personnel. Servicing is required when the 

unit has been damaged in any way, such as: if the power-supply cord or plug is 

damaged, if liquid is spilled onto or objects fall into the unit, if the unit is exposed to 

rain or moisture, or if the unit does not operate normally or has been dropped.

15. 

Caution: There is a risk of explosion if the battery is replaced by an incorrect type. 

Dispose of used batteries according to the instructions.

16. 

Only use battery packs approved by the manufacturer or else damage may occur.

Summary of Contents for VC3D2


































































Reviews: