44
Menu Option
Description
Warping
The function is to configure the geometric distortion of the
projector’s images when the images are projected onto
screens which have a kind of uneven surface such as a cylinder,
a spherical shape, etc.
Enable
Keystone and Corner Adj. will not be available when Warping is
enabled.
Control Method
Allows you to select a preferred control method for warping
adjustment.
Warping Adj.
This function is available when On is selected in the Warping
> Enable menu and OSD is selected in the Warping >
Control Method menu.
1.
Use / / /
to move the cursor to the point you wish to
adjust.
2.
Press
Enter
to enter adjustment mode.
3.
Use
/ / /
to shift the point by x and y coordinates.
4.
Press
Menu
to exit adjustment mode.
5.
Repeat step 1 to 4 to ajdust another point until you are
satisfied with the projected image.
6.
Press
Menu
/
Exit
to exit the function.
Reset
Returns settings in the
Warping
menu to the factory preset
values.
Zoom
Magnifies the projected image and allows you to navigate the
image.
Digital Lens Shift
Digital lens shift is a tool that assists in properly aligning the
projector’s image with the projector screen when digital zoom
adjusted less than 1.0x, making it far easier to correctly mount
or position a projector for optimal installation. Projectors with
digital lens shift have the ability to move the projected image
up, down, left and right to easily accommodate placement/
installation at a variety of heights & widths.
You can adjust the vertical or horizontal lens shift by +/- 50
pixels.
OverScan
Adjusts the overscan rate from 0 to 5.
NOTE:
This function is only available when a Composite Video or
HDMI input signal is selected.
