ViewSonic Pro8520HD User Manual Download | Manualshive

Page: 35 / 68

background image

28

Swap

Allow user to swap input source in PIP or POP image.

Green Mode

Enable this function when power consumption is under 0.5W.

Network

Wired LAN

Allow you to configure the wired LAN settings.
• Status: Display the projector’s status.
• DHCP: Abbreviation for Dynamic Host Configuration Protocol. This protocol

automatically assigns IP Address to networked devices.

• When the “DHCP” sets to “On”, it takes some time to obtain IP address from

DHCP server.

• When the "DHCP" sets to "Off", that means user will set IP address by manually.

• IP Address: Numerical address to identify networked computers. This function can

only be used when DHCP is set to Off.

• The IP Address is the number that identifies this projector on the network. You

cannot have two devices with the same IP Address on the same network.

• The IP Address “0.0.0.0” is prohibited.

• Subnet Mask: A numeric value to define the number of bits used for a network

address of a divided network (or subnet) in an IP Address. This function can only
be used when DHCP is set to Off.

• The Subnet Mask “0.0.0.0” is prohibited.

• Default Gateway: A server (or router) to communicate across networks (subnets)

that are divided by Subnet Mask. This function can only be used when DHCP is set
to Off.

• DNS: Setup DNS server address when DHCP is disable.
• Apply: Save and execute the wired LAN settings.

Wirless LAN

Allow you to configure the wireless LAN settings.
• Status: Display the projector’s status.
• SSID: Display the projector’s SSID information.
• IP Address: Numerical address to identify networked computers. This function can

only be used when DHCP is set to Off.

• The IP Address is the number that identifies this projector on the network. You

cannot have two devices with the same IP Address on the same network.

• The IP Address “0.0.0.0” is prohibited.

• Connection Mode: Methods for connecting to wireless networks with Wi-Fi enabled

devices.

Network Restart

Restore network settings to default.
The password for web administrator and vsPresenter will be reset to default “admin”.

Information

http://www.pureglare.com.au

«
...
33
34
35
36
37
...
»

Summary of Contents for Pro8520HD





































































Reviews:

No comments

Related manuals for Pro8520HD

Brand: Barco Pages: 6

PTL785U - LCD PROJECTOR UNIT

Brand: Panasonic Pages: 20

PTL597UL - LCD VIDEO PROJRCTOR

Brand: Panasonic Pages: 64

Brand: Panasonic Pages: 13

Brand: Panasonic Pages: 4

Brand: Panasonic Pages: 81

Brand: Panasonic Pages: 184

Brand: Panasonic Pages: 270

PTLB75NTU - LCD PROJECTOR

Brand: Panasonic Pages: 62

PTLB80NTU - LCD PROJECTOR

Brand: Panasonic Pages: 118

PTLB51NTU - LCD PROJECTOR - MULTI LANGUAGE

Brand: Panasonic Pages: 10

PTLB30NTU - LCD PROJECTOR - MULTI-LANG

Brand: Panasonic Pages: 144

PTD7700U - DLP PROJECTOR

Brand: Panasonic Pages: 132

PTD5500U - DLP PROJECTOR

Brand: Panasonic Pages: 94

PTAX200U - LCD PROJECTOR

Brand: Panasonic Pages: 54

PTFW100NTU - LCD PROJEC. WIRELESS

Brand: Panasonic Pages: 2

Brand: M-system Pages: 4

Brand: JB Systems Pages: 10

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands