5
6. The laser module must be installed for the finger touch control function,
and the laser light must be adjusted parallel to the surface of the screen.
Please perform adjustments according to the steps below:
6.1 Open the top cover of the
Laser Module
and press the
Red Laser switch
;
a levelled laser beam will appear used to calibrate the flatness of the
Laser
Module
and whiteboard.
vTouch
PJ-vTouch-10S
Quick Start Guide
1
2
4
PC System Requirements
Intel® Pentium® processor or
greater running on
Windows® Platform,
4x CD-ROM drive; 64MB or
more of available RAM;
800x600 color display.
Mac® System Requirements
Mac OS version 10.x;
4x CD-ROM drive; 64MB or
more of available RAM;
800x600 color display.
Copyright © 2016, ViewSonic Corporation. All rights reserved. All trademarks,
registered or otherwise, are the property of their respective companies. Disclaimer:
ViewSonic Corporation shall not be liable for technical or editorial reeors or omissions
contained herein; nor for incidental or consequential damages resulting from
furnishing this meterial, or the performance or use of this product. In the interest of
continuing product improvement, ViewSonic Corporation reserves the right to
change product specifications without notice. Information in this CD-ROM may
change without notice, No part of this CD-ROM may be copied, reproduced, or
transmitted by any means, for any purpose without prior written permission of
ViewSonic Corporation.
Y7RXFKB8*0DGHLQ&KLQD
vTouch
User Guide and
Interactive solution Kit
PC System Requirements
Intel® Pentium® processor or
greater running on
Windows® Platform,
4x CD-ROM drive; 64MB or
more of available RAM;
800x600 color display.
Mac® System Requirements
Mac OS version 10.x;
4x CD-ROM drive; 64MB or
more of available RAM;
800x600 color display.
Copyright © 2016, ViewSonic Corporation. All rights reserved. All trademarks,
registered or otherwise, are the property of their respective companies. Disclaimer:
ViewSonic Corporation shall not be liable for technical or editorial reeors or omissions
contained herein; nor for incidental or consequential damages resulting from
furnishing this meterial, or the performance or use of this product. In the interest of
continuing product improvement, ViewSonic Corporation reserves the right to
change product specifications without notice. Information in this CD-ROM may
change without notice, No part of this CD-ROM may be copied, reproduced, or
transmitted by any means, for any purpose without prior written permission of
ViewSonic Corporation.
Y7RXFKB8*0DGHLQ&KLQD
vTouch
User Guide and
Interactive solution Kit
*HDUV)RU
Laser Alignment
*HDUV$
*HDUV%
80~100 inch
3
Adhesive
Magnet
or
3 cm
Laser
x
Important
1
2
3
Summary of Contents for PJ-vTouch-10S
Page 35: ......
