background image

Important Safety Instructions   

 

1. Read these instructions completely before using the equipment.     
2. Keep these instructions in a safe place.     
3. Heed all warnings.     
4. Follow all instructions.   
5. Do not use this equipment near water. Warning: To reduce the risk of fire or electric 

shock, do not expose this apparatus to rain or moisture.     

6. Clean with a soft, dry cloth. If further cleaning is required, see “Cleaning the LCD TV”   

in this guide for further instructions.     

7. Do not block any ventilation openings. Install the equipment in accordance with the 

manufacturer’s instructions.   

8. Do not install near any heat sources such as radiators, heat registers, stoves, or other 

devices (including amplifiers) that produce heat.     

9. Do not attempt to circumvent the safety provisions of the polarized or grounding-type 

plug. A polarized plug has two blades with one wider than the other. A grounding type 
plug has two blades and a third grounding prong. The wide blade and the third prong 
are provided for your safety. If the plug does not fit into your outlet, consult an 
electrician for replacement of the outlet.     

10. Protect the power cord from being tread upon or pinched, particularly at the plug, and 

the point where if emerges from the equipment. Be sure that the power outlet is 
located near the equipment so that it is easily accessible.     

11. Only use attachments/accessories specified by the manufacturer.     
12. 

Use only with a cart, stand, tripod, bracket, or table specified by the 
manufacturer, or sold with the apparatus. When a cart is used, use 
caution when moving the cart/apparatus combination to avoid injury 
from tip-over.   

13. Unplug this equipment when it will be unused for long periods of time.     
14. Refer all servicing to qualified service personnel. Service is required when the unit has 

been damaged in any way, such as: if the power-supply cord or plug is damaged, if 
liquid is spilled onto or objects fall into the unit, if the unit is exposed to rain or 
moisture, or if the unit does not operate normally or has been dropped.     

15. This product is only to perform the useful function of entertainment and visual display 

tasks are excluded.     

16. The socket-outlet shall be installed near the equipment and shall be easily accessible. 
17. The equipment shall be used at maximum 40

°

C ambient temperature. 

18. Protect equipment from humidity. 
19. An approved power cord greater or equal to H05VV-F, 3G, 0.75mm2 must be used. 
20. The mains plug is used as the disconnecting device and shall remain readily operable. 
 
 
 

 

ViewSonic

 

                           

2

                         NX1940w/NX2240w 

E

N

G

L

IS

H

Summary of Contents for NX1940w


































Reviews: