ViewSonic NMP-500
12 of 38
4
In the
Browser Proxy
IP
field, type an IP address if the
Browser Proxy
was Enabled.
5
In the
Browser Proxy
PORT
field, type the port if the
Browser Proxy
was Enabled.
6
In the
Default transparency between OSD and video layer
field, type a number that is
between 0 to 255: (128 is average where video and graphics blend together). Also, see
examples in the Transparency section of this guide.
• 0 = video only, no graphics
• 255 = graphics only, no video
7
In the
Start screen display time
field, type the number of milliseconds you want the initial
screen to be displayed at startup. (1 millisecond = 1/1000 second)
8
In the
Screen Height
field, type the height of the screen that is displaying your graphics
image.
9
In the
Screen Width
field, type the width of the screen that is displaying your graphics image.
10 If any changes were made to this screen, do the following:
• To enable the changes, click
Apply
• To save the changes, click the
Administration
menu > click
Save Configuration
> click
Save
.
Summary of Contents for NMP-500
