ViewSonic NextVision M2000, Hardware User Manual

Page: 26 / 40

ViewSonic NextVision TM M2000 Digital Media Center 21
Adjusting the Speed of the Pointer
To adjust the speed that the pointer (or cursor) moves on the screen, do the
following:
1
Hold down the left and right “mouse” buttons simultaneously for four (4)
seconds. (The mouse buttons are on the far left side of the keyboard.)
2
When the LED light blinks twice, release the mouse buttons and enter the
three digit code for the desired speed (refer to table below). The LED will blink
twice after the code has been successfully entered.
NOTE: The speed level will revert back to the default Speed Level 4 each time
the batteries are changed.
You can also change the cursor speed using the mouse controls in the Windows
Control Panel if you prefer.
Using the Numeric Keypad Feature
The illustration below shows the keys that correspond to Keypad numbers and
symbols.
• To activate the Numeric Keypad feature, press the NumLock button.
• To de-activate this feature, press the NumLock button again.
Speed Level 3 Digit Code
0 Slowest 000
1 032
2 064
3 096
4 Default 128
5 160
6 192
7 224
8 Fastest 225