ViewSonic NextVision M2000, Hardware User Manual

Page: 13 / 40

8 ViewSonic NextVision
TM
M2000 Digital Media Center
7
Audio Out
• If your receiver does NOT support
5.1 digital audio, attach the analog
audio cable (L/R) from the Media
Center to the Audio IN (L/R) ports
on your receiver, which is attached
to your speakers.
• If you have a 5.1 digital Surround
Sound receiver, you can use either
the Digital Audio Optical Cable or
the Digital Audio Coaxial Cable.
NOTE: To use the Media Center
with 5.1 digital audio you will need
to do the following from the Media
Center Main Menu:
Settings > TV/DVD > DVD > Audio >
Speaker Setup > Receiver (screen) >
SPDIF (5.1 audio)
• If you do not have a receiver and
want to use the TV’s built-in
speakers, attach the analog audio
(L/R) cables from the Media
Center to your TV’s Audio In ports.
8
Connect to the Internet
Use the supplied Ethernet LAN cable
to connect the Media Center to your
Broadband modem or existing home
network (LAN), which includes an
existing ISP (Internet Service
Provider) connection.
Connection to the Internet will give
you access to an online EPG
(Electronic Programming Guide),
which will provide TV program
information two weeks before shows
are aired.
See
Connecting to the Internet at the
end of this chapter.
Audio Receiver
and Speakers
Media Center
(back)
To home
network
with
Internet
connection