![background image](http://html1.mh-extra.com/html/viewsonic/g800-20-crt-display/g800-20-crt-display_user-manual_1020347014.webp)
6
ViewSonic
G800
Operation
OnView
®
Control Menu
1. Press the power switch to turn on the monitor (see the previous page.)
2. Press the OnView button for the control menu shown below.
3. Press the minus [-] or plus [+] button to scroll through and highlight each
icon around the menu. Vertical lines in the center square are black to show
that the icon is deactivated.
4. Press OnView to activate the highlighted icon. Vertical lines in the center
square turn pink indicating that the image is ready to be adjusted.
5. Press the minus [-] or plus [+] button to adjust the image. The number of
vertical lines in the center square increases or decreases as you make
adjustments.
6. Press the OnView button to deactivate the icon. Select and activate another
icon or the Exit option. The control screen automatically saves changes
and disappears approximately 15 seconds after releasing a button.
9300
6500
5500
034
70Hz
○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○
Exit
Exit
Parallelogram
Horizontal Size
➛
User
31khz
Degauss
Rotate
Brightness
Contrast
Black lines = inactive
Pink lines = active (ready to adjust)
The monitor's horizontal and
vertical frequencies.
Saves
changes
and exits
this
control
menu.
Zoom
A selected
icon is
highlighted in
pink.
User- defined
color
temperatures.
Increase or
decrease
height &
width.
Pincushion
Vertical Position
Pin-balance
Vertical Size
Trapezoid
Horizontal Position
Color
Temperatures