17
7. If latest firmware is desired, connect the air unit to a PC or a Laptop using
USB cable and run Viewpro PC program to upgrade the firmware of the air
unit to the latest one.
1.
Connect antennas to RF ports of the ground unit.
2.
Adjust the remote controller to the training mode, if PPM mode is used, the
remote controller interface at the ground end is connected to the training
port of the remote control. If S.BUS mode is used, the cable connection
between the S.BUS receiver and the ground end need to be established,
and the connection between the receiver and the remote control need to be
established.
3.
Connect the USB port of ground control station to the serial port of the
ground unit with TTL-USB cable if you want to use Viewpro’s telemetry link.
4.
If video view on a PC or a Laptop is desired, connect a PC or a Laptop to
the ethernet port of the ground unit.
5.
Connect a 12V DC power to the power port of the ground unit and turn on
the power.
6.
If latest firmware is desired, connect the ground unit to a PC or a Laptop
using USB cable and run Viewpro PC program to upgrade the firmware of
the ground unit to the latest on
e.
