29
Edit the name of your new custom media type if you like to. Then choose a hammer force value
for the highest dots to be embossed, and the lowest dots to be embossed on your outputs.
Edit:
This will bring up the same dialog as 'Add', but with the constraint to editing the 'Lowest'
and 'Highest Dot Value' only for an existing custom media type from the list.
NOTE: DEFAULT MEDIA TYPES CAN NOT BE EDITED.
Remove: Select a media type from the drop-down list and choose 'Remove' to delete it.
NOTE: DEFAULT MEDIA TYPES CAN NOT BE REMOVED.
o
Available Forms
All forms that are available for Windows document formatting when printing to the VP Columbia
are listed in the display box, and dimensions of these forms are shown on the right upon selection
of the form name.
Add Custom Form…: This button will open a new dialog where you have the opportunity to enter
a new custom form name and define width and height for that form in either metric, or English
units of measure.
NOTE: PAPER SIZES WIDER THAN 12 INCHES MAY NOT BE ADDED.
Delete Form: If the selected form from the list is a custom size, this button will remove the
selected form.
Metric/English: Select either one of these systems to show dimensions of forms in corresponding
units of measure.
