23
Skew: If on embossed Braille text, dots 1, 2, 3, or 4, 5, 6 do not appear in a straight line
underneath each other, this could be caused by the 'Skew' setting being off. In this case make
sure to have paper loaded in the embosser, and initiate a test print clicking button 'Print Skew
Calibration'. From the printed test patterns choose the one that has the straightest vertical lines,
counting the separated pattern sections from top to bottom starting with '1'. Enter the number
of the corresponding pattern in the edit box and press 'Apply'. After pressing 'Apply' and hearing
the confirmation beep from the embosser, you may print the skew verification pattern, using
button 'Print Skew Verification', to see if further adjustment is necessary, or if you are satisfied
with the embossing result.
Network Tab
Shows Network tab of Columbia Extension Program
Network: If using the VP Columbia via network connection, this tab gives opportunity to check
network address settings, or enter static IP addresses manually.
The MAC address of your embosser will display and is also given on the bar code sticker on the
back of the embosser.
