11
TigerBox user interface Home page
You can switch between sections "Home", "Formatter Settings", "Legacy Settings", and "System"
by selecting the center left menu items.
Please find description of all items that are relevant in conjunction to printing through TigerBox
explained in chapter III. below.
If for whatever reason, access to TigerBox is not possible anymore through any device connected to the
same network, a hardware reset will be required as described in section II.D below.
D.
Hardware Reset to Wi-Fi Direct Mode
You might run into situations where TigerBox is configured to Wi-Fi Network Client mode, but connection
to the previous host network is not possible anymore. Without the connection to the host network, it will
not be possible to access TigerBox user interface to change any configuration settings.
In this case follow these easy steps to perform a hardware reset of your TigerBox which will result in
Wi-Fi Direct operation and thus provide direct access to TigerBox Wi-Fi again.
1.
Make sure to power TigerBox OFF.
2.
Plug in the USB dongle which was delivered with your TigerBox.
3.
Power TigerBox ON.
4.
Wait a minute.
5.
Power TigerBox OFF again.
6.
Take out USB dongle.
7.
Power TigerBox ON again and check if it is running in Wi-Fi Direct mode again by trying to connect
to it via mobile device.
