VIETA SVM33, Owner'S Manual

Page: 17 / 29

16
Use the USB Use the USB Use the USB Use the USB Use the USB
You can connect the USB flash to the USB jack at the side panel of unit. The unit will play MP3
music or pictures from the flash directly.
1. Plug the USB flash into the USB jack.
2. Press the
FUNCTION FUNCTION
FUNCTION FUNCTION
FUNCTION
button on the panel of the Amplifier or the
USB USB
USB USB
USB
button on remote
control to select the USB function.
3. Display shows the word “USB” .
4. MP3 music or the pictures will be played automatically.
USB Storage Device Data Protection USB Storage Device Data Protection
USB Storage Device Data Protection USB Storage Device Data Protection
USB Storage Device Data Protection
----- Always insert the USB device in the correct direction. Failure to do so may result in damage
to the USB device and this product.
- Do not remove the USB device while it is being accessed.
- Electrical interference and electrostatic discharges may cause the USB device to
malfunction and suffer damage, resulting in data loss.
It is strongly recommended that any important data is backed up on a PC to protect against
corruption, data loss or device malfunction. Please note that our company shall not accept any
liability for damage or loss of stored data.
Note: Note: Note: Note: Note: USB connection is not compatible with all hard drive models.
Listening to Radio Broadcasts Listening to Radio Broadcasts Listening to Radio Broadcasts Listening to Radio Broadcasts Listening to Radio Broadcasts
Caution: Caution: Caution: Caution: Caution: Before listening to the radio, please check if FM antenna is correctly connected.
Press the function select button
(FUNCTION FUNCTION FUNCTION FUNCTION FUNCTION)
on the panel of the Amplifier or the
TUNER TUNER
TUNER TUNER
TUNER
button on the remote control to select FM function.
Press the button
(
C
)
repeatedly to move from frequency to frequency until the next
station is found.
Press and hold the button
(
C
)
for one second or more, the frequency will change
up automatically until a right station is found.
(You can also operate the key “
C
” on the panel of the DVD Player.)
Press the button
(
D
)
repeatedly to move from frequency to frequency until the
next station is found.
Press and hold the button
(
D
)
for one second or more, the frequency will change
down automatically until a right station is found.
(You can also operate the key “
D
” on the panel of the DVD Player.)
You can store the well tuned station by pressing the program button
( PROGRAM PROGRAM PROGRAM PROGRAM PROGRAM ) on
the remote
. (You can preset up to 16 FM stations .)
Tune in the desired station, then press the program button
( PROGRAM
PROGRAM
PROGRAM PROGRAM PROGRAM)
.