Viessmann VITOPLEX 200 Type SX2A, Installation Instructions For Contractors

Page: 27 / 28

27
Rated heating output kW 90 120 150 200 270 350 440 560
Flue gas parameters *2
Temperature (at 60 °C boiler
water temperature)
■
At rated heating output °C 180
■
At partial load °C 125
Temperature (at 80 °C boiler
water temperature) °C 195
Flue gas mass flow rate
■
For natural gas kg/h 1.5225 x combustion output in kW
■
For fuel oil EL kg/h 1.5 x combustion output in kW
Required draught Pa/
mbar 0
Flue gas connection Ø mm 180 180 200 200 200 200 250 250
Standard seasonal effi-
ciency [to DIN]
(for operation with fuel oil)
For heating system tempera-
ture 75/60 °C
% 89 (H
s
) [gross cv]
Standby loss q
B,70
% 0.40 0.35 0.30 0.30 0.25 0.25 0.22 0.20
Rated heating output
Boiler with Vitotrans 300
■
Gas operation kW 98.7 131.4 164.3 219.0 295.6 383.3 478.7 608.9
■
Oil operation kW 95.8 127.8 159.8 213.0 287.5 372.7 466.4 593.5
Pressure drop on the hot
gas side
Boiler with Vitotrans 300
Pa 125 145 185 285 280 410 385 505
mbar 1.25 1.45 1.85 2.85 2.80 4.10 3.85 5.05
Total length
Boiler with Vitotrans 300
excl. burner
mm 1990 2290 2570 2950
*2
Values for calculating the size of the flue system to EN 13384, relative to 13.2 % CO
2
for fuel oil EL and 10 % CO
2
for
natural gas.
Flue gas temperatures as actual gross values at 20 °C combustion air temperature.
The details for partial load refer to an output of 60 % of rated heating output. If the partial load differs (depending on operat-
ing mode), calculate the flue gas mass flow rate accordingly.
Specification
(cont.)
5457357