26
12.
d
to confirm.
13.
|
/
~
to set the end time.
14.
d
to confirm.
15.
To adjust the beginning and end of
further time phases, proceed as
described in steps 9 to 14.
Deleting a time phase
1.
Set the time for the end point to the
same time that was set for the start
point.
The display shows "
- - : - -
".
2.
Press
d
to confirm.
Heating
HC1
§
- -:- - - - -:- -
u
0 2 4 6 8 10 12 14 16 18 20 22 24
?
- -:- - - - -:- -
u
Mo-Fr
Std
Std
Adopt with
OK
Resetting time phases to the factory settings
Note
The time phases are only reset to factory
settings when you reset all settings for
the selected heating circuits.
The steps for resetting to factory settings
can be found on page 49.
Changing the heating curve
■ You can alter the heating characteris-
tics if the room temperature does not
meet your requirements for any pro-
longed period of time.
■ You alter the characteristics by chang-
ing the slope and level of the heating
curve. For more information regarding
the heating curve, see page 28.
■ Please observe the modified heating
characteristics over several days (if
possible, wait for a major change in the
weather) before making further adjust-
ments.
Changing slope and level
For assistance, use the following table.
Central heating
Setting a time program
(cont.)
5549 811 GB
Summary of Contents for Vitoligno 300-H
Page 71: ...71 5549 811 GB...
