22
If you require central heating, check the
following points:
■ Have you selected the heating circuit?
For setting, see chapter "Selecting a
heating circuit" on page 22.
■ Have you set the required room tem-
perature?
For settings, see page 23.
■ Have you selected the correct operat-
ing program?
For settings, see page 24.
■ Have you selected the required time
program?
For settings, see page 24.
Selecting a heating circuit
Heating can, if necessary, be split over
several heating circuits.
■ In the case of heating systems with
several heating circuits, for all central
heating settings, first select the heat-
ing circuit where you want to make a
change.
■ This selection is not possible in heat-
ing systems with only one heating cir-
cuit.
Example:
■
"Heating circuit 1"
is the heating cir-
cuit for the rooms occupied by you.
■
"Heating circuit 2"
is the heating cir-
cuit for the rooms of a separate apart-
ment.
Ú
Htg circuit selection
HC2
Was selected
Heating circuit 2
Heating circuit 1
HC1
Economy mode
Select with
(
Party mode
Heating program
Set room temp.
ß
21 °C
Ù
Ú
HC2
Ù
Ú
HC1
The heating circuits are marked at the
factory as
"Heating circuit 1"
(
HC1
) and
"Heating circuit 2"
(
HC2
).
If you or your heating contractor have
renamed the heating circuits (e.g. as
"Apartment" etc.), that title is then dis-
played instead of
"Heating circuit 1"
Central heating
Required settings
5549 811 GB
Summary of Contents for Vitoligno 300-H
Page 71: ...71 5549 811 GB...
