Control Connections
37
Electrical Connections
(continued)
Routing of connecting cables
1.
Secure cables coming from the
power/pump module to the control
mounting bracket with cable ties.
Cables must not be secured
underneath mounting bracket, as
this will obstruct the installation of
the base panel (if necessary, cut
flexible conduit to required length).
2.
Pull cables between the support
arm and control unit towards you.
It is essential to route cables as
illustrated to ensure freedom of
movement of control unit.
Do not kink the capillaries of the
manometer.
3.
Run cables above the control
mounting bracket directly to the
junction box (circulating pumps).
4.
Secure cables below the control
unit with cable ties.
Cables in the vicinity of the control
unit must not be secured to the
control unit bracket.
5285
960
v1
.2
3.
4.
2.
1.
When running and securing
connecting cables on site, ensure
that the maximum permissible
temperatures of the cables are not
exceeded.
CAUTION
IMPORTANT
IMPORTANT
Summary of Contents for Vitodens 200 WB2 11-44
Page 51: ...51 5285 960 v1 2...
