45
Emissions test mode for testing flue gas must only be
activated by your flue gas inspector during the annual
inspection.
If possible, have the emissions test carried out during
the heating season.
Switching on emissions test mode
Tap the following buttons:
1.
Call up the home screen.
2.
press and hold for approx. 3 s.
3.
for
"Test mode"
4. OK
to confirm
5. OK
to acknowledge the start
6.
Follow the instructions on the display.
If test mode is possible, the burner starts.
The flow temperature of the heat generator and
burner status are shown on the display.
Note
Ensure adequate heat transfer during emissions test
mode.
Stopping emissions test mode
■
Automatically after 30 minutes
Or
■
Tap .
Emissions test mode
Emissions test mode
6172108
Summary of Contents for Vitodens 200-W System
Page 71: ...71 6172108...
