34
Tap the following buttons:
0
1.
Call up the home screen.
0
2.
press and hold for approx. 3 s.
0
3.
for
"Settings"
0
4. OK
to confirm
0
5.
for
"Display brightness"
0
6. OK
to confirm
0
7.
for
"Display"
0
8. OK
to confirm
0
9.
for the selected value
10. OK
to confirm
11.
for approx. 3 s, to exit the menu.
Switching the "Lightguide" on and off
Depending on the type of heat generator, a red illumi-
nated strip (Lightguide) is displayed at the lower or
upper edge of the control unit during operation.
In the delivered condition, the Lightguide is switched
on. You can switch off the Lightguide.
Meaning of the display:
■
Lightguide pulsates slowly:
Display is in standby mode.
■
Lightguide is illuminated constantly:
You are operating the control unit. Every input opera-
tion is confirmed by a brief flashing.
■
Lightguide flashes quickly:
There is a fault in the system.
Tap the following buttons:
0
1.
Call up the home screen.
0
2.
press and hold for approx. 3 s.
0
3.
for
"Settings"
0
4. OK
to confirm
0
5.
for
"Display brightness"
0
6. OK
to confirm
0
7.
for
"Lightguide"
0
8. OK
to confirm
0
9.
for
"ON"
or
"OFF"
10. OK
to confirm
11.
for approx. 3 s, to exit the menu.
Note
Faults are shown by flashing lights even if the Light-
guide is switched off.
Setting the "Time" and "Date"
The
"Time"
and
"Date"
are set at the factory. If your
system has been shut down for a prolonged period,
you may need to reset the
"Time"
and
"Date"
.
Setting the time
Tap the following buttons:
0
1.
Call up the home screen.
0
2.
press and hold for approx. 3 s.
0
3.
for
"Settings"
0
4. OK
to confirm
0
5.
for
"Date and time"
0
6. OK
to confirm
0
7.
for
"Time"
0
8. OK
to confirm
0
9.
for
"Time"
10. OK
to confirm
11.
for the hour
Further adjustments
Setting the display brightness
6172108
Summary of Contents for Vitodens 200-W System
Page 71: ...71 6172108...
