background image

Please file in Service Binder

6167 819 - 01   03/2021

Operating Instructions

VITODENS 100-W

Read and save these instructions

for future reference.

Product may not be exactly as shown

IMPORTANT

Do not store or use gasoline or other 

fl ammable liquids in the vicinity of this 

or any other boiler.
WHAT TO DO IF YOU SMELL GAS

  Do not try to light any boilers.

  Do not touch any electrical switches, 

  do not use any phone in your building.

  Immediately call your gas supplier  

  from a neighbor’s phone. Follow   

  the gas supplier’s instructions.

  If you cannot reach your gas supplier,  

 call 

the 

fi re department.

Installation and service must be 

performed by a qualifi ed installer, 

service agency or the gas supplier.

If the information in this manual is not followed 

exactly, a fire or explosion may result causing 

property damage, personal injury or loss of life.

WARNING

Improper installation, adjustment, and/

or operation could cause carbon monoxide 

poisoning resulting in injury or loss of life.

This product must be installed and serviced 

by a professional service technician who is 

experienced and qualified in hot water boiler 

installation and gas combustion.

WARNING

Vitodens 100-W

B1HE Series and B1KE Combi Series

Wall mounted gas-fired condensing boiler with 3.5 inch black/white display

On demand domestic Hot Water with Combi Boilers

For operation with natural gas or liquid propane gas

Heating Input: 8.5 to 199 MBH

 

2.5 to 58.3 kW

for the system user

H

Summary of Contents for VITODENS 100-W B1HE









































Reviews: