Vitodens 100-W B1HE/B1KE Operating
6167 819 - 01
16
DHW Heating
DHW Temperature
Note:
When operating with a DHW tank with temperature
switch
(such as an Aquastat), the maximum target
value of the boiler applies (depending on the boiler)
and cannot be changed.
Note:
For reasons of good hygiene, you should not set the
DHW temperature lower than 122°F (50°C).
Tap the following buttons:
1. Call up the home screen.
2.
3.
for “DHW”
4. OK to confirm
5.
for “Temperature level”
6. OK to confirm
7. for “Standard”
8. OK to confirm
9. Set the target value
10. OK to confirm
11. OK to acknowledge the information
12.
for approx. 4 sec, to exit the menu.
WARNING
Hot water can cause serious injuries.
Do not touch hot water.
Operating Programs for DHW Heating
Note:
Not valid for systems with a DHW tank with
temperature switch (such as an Aquastat).
Operating program
Function
DHW heating
“DHW” “ON”
DHW is heated in accordance with the DHW temperature
and time program specified (see chapter “DHW heating”).
“DHW” “OFF”
No DHW heating
Frost protection for the DHW tank is active.
For the Vitodens 100-W B1KE with instantaneous DHW
a scalding label is placed on the side of the boiler.
