background image

18

When ordering spare parts:
Quote the part no. and serial no. (see
type plate) and the position number of
the required part (as per this parts list).
Standard parts are available from your
local supplier.

069 Burner plate pack
070 Boiler door
071 Packaging
072 Mounting bracket
073 Pack 20 x 15
074 Thermal insulation block
075 Thermal insulation mat
076 Stud
077 Packaging
080 Mating flange
081 Gasket PN 6
082 Gasket PN 6
083 Mating flange
084 Gasket PN 6
086 Mating flange
087 Gasket PN 6
090 Flue gas collector, complete
093 Clamping clip
095 Sight glass
096 Hose nozzle
097 Sight and test pipe cover
098 Sight glass with gaskets
099 Hose
200 Upper insulation mat, front panel
201 Lower thermal insulation mat, front

panel

202 Upper insulation mat, back panel
203 Lower thermal insulation mat, back

panel

206 Spacer stud
207 Threaded pin
208 Front panel, top
209 Front panel, centre
210 Front panel, bottom
211 Back panel, top
214 Side panel, bottom

215 Side panel, top
216 Side panel, l.h. and r.h.
217 Finned bottom panel, r.h. front
220 Finned bottom panel, l.h. front
221 Cap
222 6-fold strain relief
223 Mounting bracket, back
224 Mounting bracket
225 Edge protector
226 Cable trunking
227 Trunking cover
228 Insulation mat, outer jacket, front

top

229 Insulation mat, outer jacket, back

top

230 Rear fixing bracket
231 Front fixing bracket
232 Back panel, r.h. bottom
233 Back panel, l.h. bottom
234 Finned panel, l.h. centre
235 Finned panel, r.h. centre
236 Cover panel
237 Finned panel, l.h. top
238 Finned panel, r.h. top
239 Trunking retainer (from 314 kW

only)

240 Mounting bracket fascia

Parts not shown
300 Connecting parts pack
301 Installation instructions
302 Service instructions
303 Adjustable feet pack
304 Dirko-HT sealant
305 Boiler door pack
306 Thermal insulation material pack
307 Sealant pack

A

Type plate, optionally left or right

B

Boiler control unit, see separate
parts list

C

Burner cable, see separate parts list

Parts lists

Parts lists

5692 909 GB

Summary of Contents for Vitocrossal 300 CT3 SERIES





































Reviews: