13
5.
Reconnect cables
B
.
Note
Ensure the cores are correctly allocated (see
page 14).
6.
Refit cap
A
along with the heating indicator light.
7.
Switch the power on again.
Replacing the heating element of the immersion heater
A
C
D
E
B
Fig. 10
1.
Remove cap
A
(see page 12).
2.
Disconnect the heating element cables
B
from the
TR/HLSC combination device.
3.
Remove retaining clip
C
.
4.
Pull out heating element
D
.
5.
Fit new heating element
D
.
Note
When inserting the new heating element, ensure
recesses
E
are correctly positioned at the head of
the heating element. There should be one recess
on the right, one on the left and one at the top.
6.
Reattach retaining clip
C
.
7.
Reconnect cables
B
.
8.
Fit cap
A
with the heating indicator light.
Commissioning, inspection, maintenance
Replacing the TR/HLSC combination device
(cont.)
5677415
Summary of Contents for CVE
Page 19: ...19 5677415 Appendix ...
