16
Control
System details
(cont.)
Set values
confirm
/
for selecting following
parameters:
H
Set room temperature
Standard/reduced mode/
holiday mode
H
Outside temp. low end
H
Flow temp. low end
H
Design temp. outside/flow
H
Heating curve slope
H
Flow temperature
minimum/maximum
H
Minimum flow temperature
frost protection
H
Room influencing factor
H
Time constant summer mode
H
Difference summer mode
H
Heat-up time min./max.
H
Heat up room factor
H
Heat up outside factor
H
External demand flow
temperature
H
Boiler switch-on delay
H
Party key time
H
Building type
H
Diff. flow temperature fault
H
Time flow temperature fault
confirm; value flashes
/
change value
confirm value
back to previous menu
Time switch
confirm
/
for selecting weekday
confirm; switching time flashes
/
change time
confirm
back to previous menu
Holiday program
confirm
/
for selecting start and end
confirm;
back to previous menu
Hours run starts
Scanning individual boilers
back to previous menu
Faults
confirm
/
for scanning faults
back to previous menu
Configuration
confirm
/
for "Yes" or "No"
*1
confirm
Multi-boiler control unit
*1
Configuration is required if a pressure flue gas cascade has been connected
(see pageĂ13).
5862Ă474ĂGB
