17
Note
The width of the heat pump is given with and without
side panels. The dimensions without side panels are
the transport dimensions.
Type BW 302.CS140 to BW 302.CS230
1241
644
436
1126
368
343
200
911
1932
1650
850
Fig. 9
A
flow, primary circuit (inlet):
Victaulic 3
"
(DN 80)
B
flow, secondary circuit (outlet):
Victaulic 2
½"
(DN 65)
C
return, primary circuit (outlet):
Victaulic 3
"
(DN 80)
D
return, secondary circuit (inlet):
Victaulic 2
½"
(DN 65)
E
Low voltage < 50 V
F
Power supply 230 V/50 Hz
G
Power supply 400 V/50 Hz
Note
The width of the heat pump is given with and without
side panels. The dimensions without side panels are
the transport dimensions.
Hydraulic connection requirements
■
Make on-site hydraulic connections stress-free.
■
Make the hydraulic connections between several
heat pumps on site.
■
All components required for the cooling circuit must
be provided on site. This must be achieved with an
appropriately sized plate heat exchanger.
Preparing for installation
Requirements for on-site connections
(cont.)
5789 986 GB
Installation
