Limited Warranty
36 of 38
IM-PP 724607 1218 ProPress
warranty. The part or parts which you claim failed should be kept and
Viega contacted by writing to the address below or telephoning 1-800-
976-9819 within thirty (30) calendar days after the leak or other failure and
identifying yourself as having a warranty claim. You should be prepared
to ship, at your expense, the product which you claim failed due to a
manufacturing defect, document the date of installation, and the amount
of the repair or replacement if performed by you. Within a reasonable
time after receiving the product, Viega will investigate the reasons for the
failure, which includes the right to inspect the product at a Viega location
and reasonable access to the site of damage. Viega will notify you in
writing as to the results of its review.
In the event that Viega determines that the failure or leak was the result
of a manufacturing defect in the Viega Product covered by this warranty
and to which this warranty applies, the EXCLUSIVE AND ONLY REMEDY
under this warranty shall be the reimbursement for reasonable charges for
repair or replacement of the Viega Product itself. VIEGA SHALL NOT BE
LIABLE FOR CONSEQUENTIAL OR OTHER DAMAGE (FOR EXAMPLE,
ECONOMIC LOSS, WATER OR PROPERTY OR MOLD REMEDIATION)
UNDER ANY LEGAL THEORY AND WHETHER ASSERTED BY DIRECT
ACTION, FOR CONTRIBUTION OR INDEMNITY OR OTHERWISE.
THE ABOVE WARRANTY IS IN LIEU OF ALL OTHER WARRANTIES,
EXPRESS OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, THE
IMPLIED WARRANTIES OR ANY STATUTE OF LIMITATIONS RELATING
TO SUCH WARRANTIES. Other than this Limited Warranty, Viega does
not authorize any person or firm to create for it any other obligation or
liability in connection with its products.
This Limited Warranty gives you specific legal rights and you also may
have other rights which may vary from state to state. This warranty shall
be interpreted and applied under the law of the state in which the product
is installed and is intended as a Commercial Warranty.
5.3 Limited Warranty for Marine Application
Marine applications are defined as mobile structures used to
navigate water or stationary structures in water.
Subject to the terms and conditions of this Limited Warranty, Viega LLC
(Viega) warrants to end users, installers and distribution houses that its
Viega metal press products (Viega product) when properly installed in
approved marine applications and other products sold by Viega LLC
when properly installed in marine applications in accordance with our
listings shall be free from failure caused by manufacturing defects for a
period of two (2) years from date of installation. This warranty applies
only to approved applications. Installations that are not approved shall
not be covered by this warranty and shall not be the responsibility of
Viega LLC.
Under this Limited Warranty, you only have a right to a remedy if the
failure or leak resulted from a manufacturing defect in the Viega product
and the failure or leak occurs during the warranty period. You do not have
