Requirements:
n
The pipe end is not bent or damaged.
n
The pipe is deburred.
n
The correct sealing element is in the press connector.
EPDM = polished black
n
Sealing element, separator ring and cutting ring are undamaged.
n
The complete sealing element, separator ring and cutting ring are in
the bead.
Measure insertion depth.
D
Insertion depth [mm]
⅜
24
½
27
¾
29
1
34
1
¼
46
1
½
48
2
50
Mark the insertion depth.
Push the press connector up to the marked insertion depth on the
pipe. Do not twist the press connector.
Handling
Megapress
30 from 32
