Fig. 2: Megapress press connectors
The system components are available in the following dimensions:
D ⅜ (DN 10), D
½
(DN 15), D
¾
(DN 20), D 1 (DN 25), D 1
¼
(DN 32),
D 1
½
(DN 40), D 2 (DN 50).
2.3.2
Pipes
Megapress press connectors may be used with the following seam-
less (S) or longitudinal welded (W) steel pipes:
n
black
n
galvanised
n
industrially painted
n
powder coated
The steel pipes must correspond to the applicable regulations, see
Ä
„Regulations from section: Pipes“ on page 6
If the pipe has been coated, the maximum external diameter
mentioned in the table must not be exceeded.
The standard differentiates between heavy pipe series H and medium
pipe series M or between pipe type L, L 1 and L 2. Seamless pipes and
pipes welded along the longitudinal seam belong to the different pipe
series and pipe types, see
Ä
„Regulations from section: Pipes“
on page 6.
Threaded pipe quality – heavy series H and Medium series M
Thread
size
[inch]
Nominal width
[DN]
Nominal
external diam-
eter [mm]
Min. external
diameter incl.
coating [mm]
Max. external
diameter incl.
coating [mm]
Wall thickness
heavy series H
[mm]
Wall thickness
medium series
M [mm]
⅜
10
17.2
16.7
17.5
2.9
2.3
½
15
21.3
21.0
21.8
3.2
2.6
Pipe overview – threaded pipe quality
Product information
Megapress
9 from 32
